English
Deutsch
Português
Español
Pусский
Français
العربية
简体中文

Home » Door Hardware Resources » European Standard Door Hardware » BS EN1154 Door Closer Standard and Certification

BS EN1154 Door Closer Standard and Certification

Publish Time: 2021-05-24     Origin: D and D Hardware

BS EN 1154:1997 -The European standard for the performance of controlled door closing devices.

 

Introduce in detail the product type, usage classification, test period, test period, door quality, corrosion resistance, as well as product definition, product performance requirements, test instruments, test methods and product markings.

 

BS EN 1154:1997 classifies door closers by using a 6 digit coding system.

 

1. Category of use 

 

Two categories are defined.

 

Grade 3: For closing doors from at least 105° open

 

Grade 4: For closing doors from 180° open

 


2.Number of test cycles 

 

only one categories are is identified.

 

Grade 8: 500,000 cycles

 

 

3.Test Door Mass/ size 


Where a door closer provides a range of power sizes both the minimum and maximum shall be identified. Door size/mass in accordance with BS EN 1154:1997

 

 

4.Fire Behaviour 

 

Two categories are defined.

 

Grade 0 : Not suitable for use on fire/smoke door assemblies

 

Grade 1:Suitable for use on fire/smoke door assemblies, subject to satisfactory testing and evaluation (See BS EN 1634 Part1: 2000)

 

5.Safety 


All door closers must meet the basic requirements for safe use. Therefore only grade 1 is identified.

 

6.Corrosion resistance 

 

Five categories are defined.

 

Grade 0 : No defiined resistance.

 

Grade 1 : mild resistance

 

Grade 2 : moderate resistance

 

Grade 3 : high resistace

 

Grade 4 : very high resistance

 

BS EN 1155:1997 -The European Standard for the performance of electrically powered hold open devices for swing doors.



This standard again provides detailed information on product types, usage classifications, test cycles, door quality, corrosion resistance, as well as definitions, product performance requirements, test equipment, test methods and product markings.

BS EN 1155:1997 classifies products using the same 6 digit coding system as outlined in BS EN 1154:1997. The only difference being box 3 where BS EN 1154 refers to durability, BS EN 1155 refers to hold open power size.

As a professional door closer manufacturer in China, we provide customers various exterior and interior door closer, like concealed door closerheavy duty door closer, 

Hydraulic Door Closer etc. Our door closers are high-quality, durable, anti-rust and textured. The door closers we provide are suitable for wood door, metal door, fire door, double door, single door, steel door of commercial or residential application.

 


Contact us Now:

Contact: David Jian
Mob:0086-139 2903 7292
Email: David@dndhardware.com, sales@danddhardware.com, 

Jobby Zhang
Mob:0086-137 2599 9617
Email: jobby@dndhardware.com

Contanct Us

Get Famous Branded Quality at Factory Cost 12th Floor, Building 2, No.898, KeChuang Technical Zone,Jianghai Dist.Jiangmen City,Guangdong,China
   +86 139 2903 7292
   +86 139 2903 7292
  +86 139 2903 7292
 David Jian(Managing Director)
 Ms Judy(Financial / Account Dept. )

To get international branded quality at factory cost

 Copyright ©2021  D&D HARDWARE INDUSTRIAL Co., Ltd . All Rights Reserved. |Sitemap