Publish Time: 2021-12-09 Origin: D and D Hardware
Store/Public Entrance - frameless glass door without overhead panel – double door configuration-European standard
Security, safety,function and convenience are the foundation of door hardware that architects, builders, and designers, and end users expect from D&D. D&D door hardware is manufactured to meet the needs of commercial building. D&D Hardware can provide complete door hardware solutions for your Glass Double Door.
Door design consideration mainly as below:
1, Where the building and inner door located
2, Where the interior door located
3, Number of times a door opens and closes
Main concern points for this configuration are:
1, user-friendly
2, Security
Door opening & closing description:
Push or pull to opening the door when unlock.
Use key to lock or unlock the patch fitting lock on either side.
This configuration is suitable for below applications:
Office building | 5-stars hotel | Shopping mall | hotel |
Government building | High-end club |
Associate door hardware
Glass Top patch fitting-DDPT003
Top side-hung leaf corner fitting with mount for pivot bearing bolts (15 mm dia.)
With installation materials for glass thicknesses 10 -12mm
Top patch fitting pivot-DDPP204
Upper pivot bearing with heavy duty pivot bearing bolt.
Glass Bottom patch fitting-DDPT001
Bottom side-hung leaf corner fitting with mount for flat conical spindle with installation materials for glass thicknesses 10-12 mm
Glass Patch fitting lock-DDPT004
Patch fitting lock with square dead bolt, with installation materials for glass thickness 10-12 mm, with Euro-profile cylinder and strike plate/recess.
Glass door pull handle-DDPH001 x 2sets
Glass door pull handle, dia. 25Xctc450xL600xH80mm, stainless steel 304 material in Satin finish,
CONTROLING -Floor spring-DDFS208 x2sets
Double action floor spring, size 268x113x48mm, max. door weight up to 100kg, Door width 800-1000mm, 90° hold-open, open in both directions, max. opening 116°, adjustable closing speed, two-stage speed adjustment, position can be adjusted horizontally/vertically, not permissible for use on fire and smoke protection doors.
PROTECTING -Door stop-DDDS001 x 4 pieces
D&D 44mm diameter x 25mm height, half-moon type floor mounted comes with screws for fixing, in SUS304 stainless steel material, SSS finish, pack with suitable screw pack.
D&D Hardware is ISO 9001 certified factory with UL, ANSI, CE Certified Door Hardware for Metal Doors, Wooden Doors, Fire Rated Doors etc. Our main products are Door Hinge,Mortise lock,Lever handle,Lock Cylinder,Door Closer and Panic exit device. Providing Door Opening Solution for commercial buildings. Our qualified team with more than 13 years of experience to support your customized needs.
Contact us Now:
Contact: David Jian
Mob:0086-139 2903 7292
Email:sales@danddhardware.com