Welcome to D&D HARDWARE INDUSTRIAL Co., Ltd . 
D&D, Leader in Commercial Door Hardware
Pls inquire to  sales@danddhardware.com
/ / ：+86 139 2903 7292
How to Select the Right CE Door Hinge for Your Fire Door Project
A comprehensive decision guide for architects, door manufacturers, and project contractors seeking CE-certified hinges that meet EN1935, EN1634, and EN1670 standards — with factory-direct pricing and full documentation support.
 

200,000

Cycle Durability

260 min

Fire Rating

240 Hours

Corrosion Resistance

9

Certified Sizes
Selecting CE Door Hinges: 
What Every Specifier Needs to Know
Choosing the correct CE-certified hinge is critical for fire door compliance, building safety, and long-term performance. This page helps you evaluate the key factors that determine hinge suitability for your specific project requirements.

Regulatory Compliance

Under EU Construction Products Regulation (CPR No. 305/2011), fire door hardware must carry CE marking backed by third-party testing. Non-compliant hinges invalidate the entire fire door assembly rating and expose contractors to legal liability.

Performance Grade Selection

EN1935 defines 14 hinge grades. For commercial fire doors, Grade 13 (200,000 cycles, 120kg door mass) is the recommended minimum. Lower grades risk premature failure in high-traffic environments such as hospitals, hotels, and office buildings.

Fire Rating Requirements

EN1634 fire testing determines how long a hinge maintains door integrity during a fire. For steel fire doors, a 260-minute rating exceeds FD240 requirements. For wooden doors, 192 minutes surpasses FD120 standards — providing significant safety margins.

Corrosion Environment

EN1670 salt spray testing measures long-term durability. A 240-hour rating (Grade 4 — Very High Resistance) is essential for coastal buildings, high-humidity environments, swimming pool areas, and exterior fire door applications.

Material Specification

Stainless steel grade directly impacts longevity. SS304 suits most interior commercial applications. SS316 is recommended for marine environments, chemical exposure, or exterior installations where chloride attack is a concern.

Documentation & Traceability

Building inspectors and insurance underwriters require complete documentation: Declaration of Performance (DoP), test reports, and CE certificates. Ensure your supplier provides traceable documentation for every hinge size specified.
● Certified Performance ●
D&D CE Door Hinge Certification Data
Every D&D CE hinge undergoes rigorous third-party testing across three independent European standards. Here is what the test results confirm.

BS EN 1935

200,000 Open/Close Cycles
Grade 13 — the highest performance grade for door hinges. Tested at 120kg door mass, ensuring structural integrity throughout the full service life of heavy commercial fire doors in high-traffic environments.
 
───────────────────────────────────
Highest Grade Available

EN 1634

260 Minutes Fire Resistance
Independently fire-tested for 260 minutes on metal steel doors and 192 minutes on wooden composite doors. Maintains door integrity as a passive fire protection barrier throughout the rated period.
 
───────────────────────────────────
Exceeds FD240 Requirements

EN 1670

240 Hours Salt Spray Test
Grade 4 (Very High Resistance) corrosion rating. Validated for use in demanding environments including coastal areas, humid climates, and exterior fire door applications where long-term surface integrity is critical.
 
───────────────────────────────────
Grade 4 — Very High
The combination of these three certifications provides complete coverage for commercial fire door applications. Unlike suppliers who only test to EN1935 without fire or corrosion testing, D&D's triple-certified approach ensures that every hinge meets the full spectrum of requirements demanded by European building regulations and international project specifications.
CE Certified Hinge Specifications — 9 Sizes Available
All sizes below are individually CE certified under BS EN1935, EN1634, and EN1670. Available in stainless steel 201, 304, or 316 with multiple finish options.

Picture
Model No. DDSS001-CE DDSS001-CE DDSS001-CE DDSS001-CE DDSS001-CE DDSS001-CE DDSS001-CE DDSS001-CE DDSS001-CE
Height 4" (102mm) 4" (102mm) 4" (102mm) 4.5" (114mm) 4.5" (114mm) 5" (127mm) 5" (127mm) 5" (127mm) 5" (127mm)
Width 3" (76mm) 3.5" (89mm) 4" (102mm) 4" (102mm) 4.5" (114mm) 3" (76mm) 3.5" (89mm) 4" (102mm) 4.5" (114mm)
Thickness 3.0mm 3.0mm 3.0mm 3.0mm 3.0mm 3.0mm 3.0mm 3.0mm 3.0mm
Bearing 2 Ball Bearing 2 Ball Bearing 2 Ball Bearing 2 Ball Bearing 2 Ball Bearing 2 Ball Bearing 2 Ball Bearing 2 Ball Bearing 2 Ball Bearing
Door Type Wood / Steel Wood / Steel Wood / Steel Wood / Steel Wood / Steel Wood / Steel Wood / Steel Wood / Steel Wood / Steel
Fire Rating 192 / 260 min 192 / 260 min 192 / 260 min 192 / 260 min 192 / 260 min 192 / 260 min 192 / 260 min 192 / 260 min 192 / 260 min

Material Options

Stainless Steel 201 / 304 / 316 |

Finish Options

SSS (Satin), PSS (Polished), PVD Gold, 
PVD Black, Antique Brass |

Custom

Non-standard sizes and finishes available 
for OEM orders (MOQ applies)
● Performance Comparison ●
D&D CE Hinge vs. Standard Market Alternatives
Understanding how D&D's CE Grade 13 hinges compare to typical alternatives helps specifiers make informed decisions for their fire door projects.

Performance Criteria D&D CE Grade 13 Generic CE Hinge Non-Certified Hinge
EN1935 Grade Grade 13 (200,000 cycles) Grade 7-11 (varies) Not tested
Fire Rating (Steel Door) 260 minutes 60-120 minutes (typical) No rating
Fire Rating (Wooden Door) 192 minutes 30-60 minutes (typical) No rating
Corrosion Resistance 240 hours (Grade 4) 48-96 hours (Grade 2-3) Unknown
Material SS 201/304/316 SS 201 or Iron Iron / Zinc Alloy
Certified Sizes 9 sizes documented 1-3 sizes (limited) N/A
DoP & Test Reports Full package available Partial (upon request) Not available
OEM Customization Full service Limited Basic
Specifying D&D CE Grade 13 hinges eliminates compliance risk, reduces the likelihood of failed building inspections, and provides documented evidence of performance that satisfies architects, building control officers, and insurance underwriters.
Need help selecting the right hinge for your project?
D&D’s technical team can recommend the optimal size, material, and finish based on your door specifications.
● Manufacturer Advantages
Why Door Manufacturers Choose D&D for CE Hinges？
Over a decade of specialized experience in manufacturing certified commercial door hardware for global markets. 
Here is what sets D&D apart from generic hinge suppliers.

Factory-Direct Manufacturing

Produced in-house at our Guangdong facility with full quality control from raw material to finished product. No trading companies or middlemen — you deal directly with the manufacturer for the most competitive pricing on bulk and OEM orders.

Complete Certification Package

All 9 sizes carry valid CE certification with full documentation: Declaration of Performance (DoP), third-party test reports from accredited laboratories, and CE mark certificates — ready for building control submissions and insurance verification.

OEM & Custom Engineering

Tailored solutions for door manufacturers: custom sizes beyond the standard 9, private labeling, bespoke packaging, and finish matching. Our engineering team works with your R&D department to develop hinges that integrate perfectly with your door systems.

Global Supply Chain Expertise

Supplying to Europe, North America, Middle East, and Southeast Asia with deep understanding of regional compliance requirements, shipping logistics, and documentation standards. Experienced in handling large-scale project orders with phased delivery schedules.

Consistent Quality at Scale

ISO-certified manufacturing processes ensure batch-to-batch consistency. Every production run undergoes dimensional inspection, bearing torque testing, and surface finish verification before shipment — critical for door manufacturers running automated assembly lines.

Inventory & Rapid Delivery

Standard sizes in popular finishes maintained in stock for fast dispatch. For project orders, our production capacity supports lead times from 15-30 days depending on volume and customization requirements. Flexible delivery scheduling for phased construction projects.
● Performance Comparison ●
Understanding the EN1935 8-Digit Classification System
The EN1935 standard uses an 8-digit coding system to classify hinge performance. Understanding this 
system helps specifiers verify that a hinge meets their project requirements.
Digit 1

Category of Use

Grade 4 = Severe Duty. D&D hinges are rated for the most demanding commercial applications with the highest traffic volumes.
Digit 3

Door Mass

Grade 6 = 120kg maximum door mass. Suitable for heavy commercial steel fire doors without performance degradation.
 
Digit 5

Safety in Use

Grade 1 = Satisfies essential safety requirements. Mandatory for all single-axis hinges under the standard.
 
Digit 7

Security

Grade 0 = Not suitable for use on burglar-resistant door assembiles.
 
 
Digit 2

Durability

Grade 7 = 200,000 test cycles. The highest durability grade for door hinges, ensuring decades of reliable operation.
 
Digit 4

Fire Resistance

Grade 1 = Suitable for fire/smoke resistant door assemblies. Tested per EN1634-1 with documented fire performance.
 
Digit 6

Corrosion Resistance

Grade 4 = Very High Resistance (240 hours). The highest corrosion grade, suitable for the most demanding environments.
Digit 8

Hinge Grade

Grade 13 = 200,000 cycles at 120kg. The highest practical grade for commercial door applications, exceeding all standard requirements.
D&D CE Hinge Classification Code:
4 7 6 1 1 4 0 13 — This represents the highest available performance across all eight classification digits, 
confirming suitability for the most demanding commercial fire door applications in any environment.
Where Are CE Grade 13 Hinges Specified?
CE-certified Grade 13 hinges are specified wherever fire-rated door assemblies must comply with European building regulations or international projects adopting EN standards.
 SCENARIOS 01

Commercial Office Towers

High-traffic stairwell doors, corridor fire doors, and server room access points requiring Grade 13 durability and full fire compliance documentation for building management.
 
──────────────────────────────────────
 SCENARIOS 02

Hotels & Hospitality

Guest room corridor fire doors, kitchen fire exits, and banquet hall compartmentation where aesthetic finishes (PVD, black) must combine with certified fire performance.
 
──────────────────────────────────────
 SCENARIOS 03

Educational Institutions

School corridor fire doors, laboratory exits, and assembly hall compartmentation requiring high-cycle durability to withstand constant student traffic throughout term time.
 
──────────────────────────────────────
 SCENARIOS 04

Healthcare Facilities

Hospital fire compartment doors, operating theatre access, and pharmacy secure areas where 260-minute fire ratings on steel doors protect patients and critical medical infrastructure.
 
──────────────────────────────────────
 SCENARIOS 05

Mixed-Use Developments

Residential-commercial boundary fire doors, parking structure access points, and shared escape routes where multiple building codes intersect and comprehensive certification is mandatory.
 
──────────────────────────────────────
 SCENARIOS 06

Industrial & Logistics

Warehouse fire compartment doors, factory production area separations, and loading bay fire exits where heavy steel doors demand Grade 13 load-bearing capacity and corrosion resistance.
 
──────────────────────────────────────
Working On A Specific Project Type?
Tell D&D your building type and door specifications 
— we will recommend the optimal hinge configuration.

PHONE

+86-139 2903 7292

LOCATION

Jiangmen, Guangdong, China
● Expert Answers ●
Frequently Asked Questions About CE Door Hinges
Answers to the most common questions from architects, door manufacturers, and project 
contractors about CE-certified hinge selection and procurement.

Contact us For Increase Your Profits and Market Shares

D & D Hardware has established long business relations with customers from America, Europe, Middle East and Asia, Selling our items are proved to be profitable,collection approve by consultants,international branded quality with certifications from Intertek/UL.

Tel/WhatsApp/WeChat

+86 139 2903 7292

Address

12th Floor , Building 2, No. 898, KeChuang Technical Zone, Jiangmen Avenue, Pengjiang District, Jiangmen City, Guangdong, China

Contact us For Increase Your Profits and Market Shares

Contanct Us

Get Famous Branded Quality at Factory Cost 12th Floor, Building 2, No.898, KeChuang Technical Zone,Jianghai Dist.Jiangmen City,Guangdong,China
   +86 139 2903 7292
   +86 139 2903 7292
  +86 139 2903 7292
 David Jian(Managing Director)
 Ms Judy(Financial / Account Dept. )

To get Famous Brand Quality at Low cost
 Copyright ©2021  D&D HARDWARE INDUSTRIAL Co., Ltd . All Rights Reserved. |Sitemap