ANSI/BHMA A156.4 Door Closer

American National Standard Institute (ANSI) ANSI 156.4

1. SCOPE

1.1 This Standard contains requirements for door closers surface mounted, concealed in the door, overhead concealed and concealed in the floor. Also included are pivots for floor closers. Criteria for conformance include cycle, operational, closing force and finish tests. Optional tests which shall be specified separately are also included.

1.2 Tests in this Standard are performed under neutral air pressure laboratory conditions and between 60 and 85 degrees F. In actual usage results vary because of installation, maintenance, and environmental conditions. Actual closer performance is affected by fluctuating ambient conditions such as wind and pressure differentials, consult factory for recommendations.

1.3 Use on Fire Doors A door closer used on labeled fire door assemblies shall be listed or labeled by a nationally recognized independent testing laboratory, and be subject to a periodic in-plant follow-up service. Consult the authority having jurisdiction for the appropriate fire test requirements.

As a professional door hardware supplier, D and D Hardware provides high-quality and durable hardware products for distributors and manufacturers. Our products have passed ANSI/UL, CE EN tests, including door lock, door hinge, panic door bar, door cylinder, door handle, door closer, etc..

D and D HARDWARE continues to improve processing technology, update processing equipment, and provide customers with more high performance cost ratio products.

If you want to know more about our products, please click here.

Contact  Us Now:

Contact: David Jian
Mobile:0086-139 2903 7292
E-mail: David@dndhardware.com, sales@danddhardware.com, 

Jobby Zhang
Mobile:0086-137 2599 9617
E-mail: jobby@dndhardware.com