How to choose Fire and Escape Door Hinges?

When utilizing fire door assemblies, the door foliage should be hung on a single axis hinge according to national and local regulations. The hinge installed on the fire door ought to be in a position to achieve the anticipated fire rating, along with the hinge should also permit the door closing device to reliably close the door foliage from any angle when installed over the fire door meeting. Experience from building escape and general safety shows it is crucial to install appropriate hinged doors to the escape path to ensure in the event of a fire or other catastrophe, the residents of the construction can quickly and easily escape from the construction.

As part of the construction fire compartment, the escape door includes high installation requirements to make sure the installed hinge won't damage the fire operation of the door. Here we are to Comprehend the standard of flame door hinges:

1. Unless otherwise stated, it is suggested to use to both hinges of fire door assemblies and hinges installed on doors on escape routes.

According to the necessities of the British fire protection regulations on door hardware fittings, fire door hardware must pass the CE mark of BS EN 1935, and it's best to give certification by an accredited third party certification body.

2. Once the door hinge is used in a fire door, the hinge must pass the BS EN 1634-1 or BS EN 1634-2 fire resistance test, and this evidence ought to be offered by an approved third-party certificate or testing agency.

D and D HARDWARE's CE fire rated door hinge may still work normally after departure the CE certification evaluation and will make the door open and close normally. The D and D HARDWARE fireproof door hinge with the highest performance could be applied to different occasions of the doorway.

3. Please keep in mind the following points: For the size of the door and also the quality of the installation, its strength and function Has to Be correct:

●Door application (main entry, bathroom hall, air-conditioning door).

●In the event the position of the door stopper is used (relative to the standing of the doorway width on the wall or floor )

●Whether it's influenced by the stream of people along with the frequency of usage

●When the door closer is being used (with or without delay purpose )

●The size (height and width) and mass (weight) of the doorway and the position of the hinge

●whether the doorway is in an accessible route and consequently needs to satisfy Part M of the Building Regulations

4. A routine maintenance program must be executed to ensure the right operating performance of the hinge is preserved throughout the life span of the construction.

It's not recommended to utilize spring hinges for fire doors.

5. For wooden frames and doors, the length of the fixing screws will not be less than 8 (3.8 mm), and the length shall be less than 30 mm.

For metal doors, the dimensions may vary based on the fixing procedure.

6. The corrosion resistance of the hinge used in the escape door should not be lower than BS EN 1670 amount 3.

CE marked hinges shall be indicated according to ZA EN 3 of BS EN 1935.

7.The fire door hinge is the center of the flame door suspension system, which bears the opening and closing of the door for everyday usage. It can withstand the fire temperature in case of a fire, make sure the functionality of the fire door, and protect people from utilizing the fire door to escape. It meets UL and CE test requirements and may still work normally and let fire doors to be opened and shut normally. It's the maximum performance and is suitable for education, healthcare, and hospitality, residential and business applications. A specialist team can provide a complete hardware fitting solution.

For more info about fire rated door hinge or any of our services, click here.

Official Website:www.danddhardware.com

Email:sales@danddhardware.com

Tel / WhatsApp / Wechat:+86-13929037292