Important Things to Consider When Purchasing Panic Door Hardware

During a fire or emergency, Panic Door Hardware helps to ensure the safe evacuation of building occupants. It provides a fast and affordable way to exit a building. It is a popular alternative to dead bolts or push/pull hardware. However, there are some important things to consider when purchasing panic door hardware.

Depending on the model code, you may need to use a latch or push bar. The latch must project automatically when a fire alarm is detected. The push bar must not extend more than half the width of the door from the latch side.Another feature you may want to look for is a dogging feature. This is especially useful on doors that receive high traffic during business hours. It allows you to open the door from both ends.

Another feature you may want to look for is an actuating member that operates mechanical latching bars. This feature is useful on balanced doors.One way to ensure your panic hardware is in line with your local fire codes is to ask your local building inspector. In most cases, they will know what the requirements are. However, in some cases, you may need to consult an expert.

UL has been providing certification for panic hardware for over ninety years. This company is a world leader in product safety testing. They offer ongoing factory surveillance programs and third-party testing.These certifications ensure the safety of the product. The certification process is called ULCERT. The UL certificate for a Panic Exit Device is not easy to rust. The smooth and wear resistant surface will keep its original shape for a long time.

The UL 305 is a minimum standard for testing life safety hardware. It was developed as a test method for panic hardware in emergency exits. It includes tests that involve latching. The device must complete a maximum of 100,000 cycles of operation without failure.The device must be able to operate with a force of 15 pounds or less. It must be able to operate at a rate of fifteen cycles per minute. The device must be able to operate without any additional lubrication.

Panic hardware is a necessary component of an egress opening. These devices are often evaluated against ANSI/BHMA A156.3 test standard. The test standard focuses on strength, architectural finish, and product performance.These devices may include a rim cylinder, a small steel pull plate, or a thumb piece. They are commonly used on glass doors. They may also have internal parts. Some of the devices have electrified options.

Some of the newer fire safety guidelines require UL Panic Bar on fire exit doors. These devices will lock and unlock a door. They can be installed on single or double leaf doors.

UL Fire Exit Hardware is designed to provide the necessary fire protection for an opening. It is designed for use on fire doors and window frames. The devices are made of stainless steel and can be found in a satin stainless steel or powder coated aluminum finish.

The 9850WDC device is non-handed, and is available in a smooth case or a grooved case. The SS (special dogging) feature is available for both vertical and rim systems. The device also features a special actuating linkage for pneumatic dogging. This feature is ideal for use with automatic door operators.

The EL (Electric latch retraction) feature provides electronic control of the exit device. The device is powered by two 18 gauge wires. This option is ideal for use on heavy traffic doors. It does not include a control operator or power transfer from the door to the frame. The EL option also uses a powerful continuous duty solenoid.

panic door hardware

UL Panic Bar

UL Fire Exit Hardware