Views: 0 Author: D&D HARDWARE Publish Time: 2026-04-08 Origin: D&D Hardware
Factory Direct | ANSI Grade 1 · UL 10C · CE EN1125 Certified | Get a Free Quote: sales@danddhardware.com
Commercial Door Hardware Expert - Trusted by 50+ Countries
Ensure life-safety compliance and protect building occupants with D&D Hardware's certified panic exit devices — engineered for fire-rated metal doors, high-traffic commercial buildings, and global code compliance.
Why Certification Matters
In any commercial, institutional, or industrial building, a panic exit device (also known as a panic bar, push bar, or exit device) is the frontline life-safety mechanism that enables immediate, single-motion egress during emergencies such as fires, earthquakes, or active threat situations. Mandated by the International Building Code (IBC §1010.1.9) and NFPA 101 Life Safety Code for assembly occupancies exceeding 49 persons, these devices are non-negotiable in schools, hospitals, offices, and public facilities.
The operational reliability of a commercial door push bar under extreme heat, heavy usage, and emergency conditions is entirely determined by its adherence to rigorous international safety standards. A panic bar that fails at the critical moment is not just a product defect — it is a life-threatening liability. This is precisely why certifications from UL, CE, ANSI, and BHMA are the definitive benchmarks for specifying compliant, trustworthy emergency exit hardware.
As a leading Commercial Panic Exit Device Supplier, D&D Hardware manufactures and supplies a comprehensive range of certified panic exit devices for fire-rated metal doors and wooden doors, serving architects, contractors, and distributors across more than 50 countries worldwide.
UL 305 & UL 10C
3-Hour Fire Rated
EN 1125 & EN 1634
240-Min Fire Rated
A156.3 Grade 1
500,000 Cycles
Builders Hardware
Manufacturers Assoc.
Certification Standards Explained
Selecting the right certification for your market and application is critical. Below is a comprehensive breakdown of each standard and the D&D Hardware products that meet them.
UL Certification — The North American Standard for Fire-Rated Panic HardwareUL (Underwriters Laboratories) is the most authoritative safety certification body in North America. For panic exit devices, two UL standards are paramount: UL 305 governs the mechanical performance of panic hardware (maximum 15 lbs actuation force, operational reliability under stress), while UL 10C certifies fire-rated exit devices through rigorous positive-pressure fire tests, validating performance at fire ratings of 1.5 hours, 3 hours, and beyond.
D&D Hardware's UL-listed panic exit devices carry the certification number R40486 / SA45817 and comply with both UL 305 and UL 10C. This means every device has been independently tested for durability, emergency operation under extreme heat, low-temperature impact (down to −30°F / −34°C), and high environmental exposure — guaranteeing that the device will function when it matters most.
•Type: Surface Vertical Rod Exit Device
•Certifications: UL Listed (R40486), ANSI Grade 1
•Material: SUS304 or Painted Steel
•Finish: SSS, PSS, PVD, Black, ORB, Gold
•Application: Double doors, top & bottom latching
•Type: Rim Panic Exit Device
•Certifications: UL 10C (3-Hour), ANSI Grade 1
•Material: High-Quality Steel / SUS304
•Finish: SSS, Silver Painted, PVD, Black
•Application: Single door, fire-rated metal doors
•Type: Rim Exit Device with Alarm
•Certifications: ANSI Grade 1, UL 305
•Material: Steel / Stainless Steel
•Finish: SSS, Silver Painted, PVD, Black
•Application: Single doors and double doors
CE Certification — Mandatory Compliance for the European MarketThe CE mark (Conformité Européenne) is the mandatory gateway for panic exit devices entering the European Economic Area. For emergency exit hardware, the two governing standards are EN 1125 (panic exit devices operated by a horizontal push bar, for use in public buildings where users may be unfamiliar with the exit) and EN 179 (emergency exit devices operated by a lever handle, for non-public areas). Fire resistance is governed by EN 1634-1.
D&D Hardware's CE panic exit devices have been rigorously tested and certified by Intertek, one of the world's leading testing and certification bodies. Our CE range achieves a fire rating of 132 minutes for rim-type devices and up to 240 minutes for vertical rod and push bar types. Durability is validated at 200,000 operational cycles, with corrosion resistance tested to EN 1670 at 240 hours — ensuring long-term reliability in all climatic conditions.
•Type: Rim Type Push Bar
•Certifications: CE EN 1125, EN 1634 (132 min)
•Durability: 200,000 cycles tested
•Corrosion: EN 1670 — 240 hours
•Finish: SSS, Silver, Black, Red, PVD
•Type: Vertical Rod Panic Bar
•Certifications: CE EN 1125, EN 1634 (240 min)
•Durability: 200,000 cycles tested
•Application: Commercial double doors
•Finish: SSS, Silver Painted, Black
•Type: Touch Cross Bar Exit Device
•Certifications: CE EN 1125, EN 1634 Fire Rated
•Material: Stainless Steel / Steel
•Application: Commercial buildings
•Finish: SSS, Silver, Black, etc.
ANSI & BHMA Certification — Defining Commercial Performance StandardsANSI (American National Standards Institute) and BHMA (Builders Hardware Manufacturers Association) work in tandem to establish the definitive performance and quality benchmarks for architectural hardware in North America. The relevant standard for panic exit devices is ANSI/BHMA A156.3, which classifies hardware into three grades based on operational cycle testing and mechanical strength.
Grade 1 (500,000 cycles) is the highest classification, designed for the most demanding heavy-duty commercial applications — schools, hospitals, airports, stadiums, and high-rise office buildings. Grade 2 (250,000 cycles) suits standard commercial use, while Grade 3 is for light-duty applications. For any commercial emergency exit door, architects and code officials universally specify ANSI/BHMA Grade 1 hardware. All D&D Hardware panic exit devices meet or exceed the Grade 1 standard.
Why D&D Hardware
As a direct manufacturer based in Jiangmen, Guangdong, China, D&D Hardware delivers internationally certified panic exit devices at competitive factory costs — without compromising on the quality that life-safety applications demand.
UL 10C certified (R40486). Our panic bars withstand 3 hours of positive-pressure fire testing, exceeding most building code requirements.
ANSI/BHMA Grade 1 certified. Every device is tested to 500,000 operational cycles — equivalent to decades of heavy commercial use.
Simultaneous UL/ANSI (North America) and CE EN1125/EN1634 (Europe) certifications, enabling global project specifications from a single supplier.
Fabricated from high-grade SUS304 stainless steel and quality steel, providing exceptional corrosion resistance and structural strength for demanding environments.
Available in SSS, PSS, PVD, Antique Brass, Silver, Black, Red, and Gold finishes to complement any architectural aesthetic.
Fabricated from high-grade SUS304 stainless steel and quality steel, providing exceptional corrosion resistance and structural strength for demanding environments.
Application Scenarios
Per IBC §1010.1.9 and NFPA 101, panic hardware is required in specific occupancy types. D&D Hardware's certified devices are specified across a wide range of commercial applications.
High-occupancy educational facilities with mandatory egress requirements
Critical life-safety environments requiring fire-rated, ADA-compliant hardware
Commercial high-rises and multi-tenant buildings with stairwell exit doors
Warehouses and manufacturing plants with high-hazard occupancy classifications
Assembly occupancies exceeding 49 persons requiring panic hardware by code
Fire-rated stairwell and emergency exit doors in multi-story hospitality buildings
High-density assembly occupancies with the most stringent egress requirements
High-traffic public facilities requiring maximum durability and reliability
Frequently Asked Questions
Common questions from architects, contractors, and facility managers about specifying and sourcing certified commercial panic exit devices.
For North American projects, specify hardware with UL 305 (panic performance) and/or UL 10C (fire-rated), plus ANSI/BHMA A156.3 Grade 1 certification. For European projects, require CE marking to EN 1125 (panic hardware) and EN 1634-1 (fire resistance). D&D Hardware offers products certified to all four standards, making us an ideal single-source supplier for global projects.
